IP ratings in one minute
An IP code has two digits. The first is protection against solids: 5 is dust protected, 6 is dust tight. The second is protection against water, and here the number is the name of a test, not a point on a scale. IP65 is a jet from a 6.3 mm nozzle, IP66 a stronger jet from a 12.5 mm nozzle, IP67 half an hour under a metre of water, IP68 longer and deeper immersion on terms the maker states. IP69K is a hot, high-pressure jet from a separate standard.
A higher second digit is therefore not always better. Immersion (7 and 8) and jets (5 and 6) are different tests, so a product that passes IP67 has not necessarily passed the IP66 jet test, and a jet can find a gap that still water never would. That is why washdown products are often listed with two ratings, such as IP66 / IP67, and why the connectors on a product can carry a different rating from its enclosure.
IP65 vs IP66 vs IP67 vs IP68 vs IP69K
| Rating | Dust | The water test | In plain words |
|---|---|---|---|
| IP65 | Dust tight | Water jets from a 6.3 mm nozzle, about 12.5 litres a minute, from about 3 m | A hose |
| IP66 | Dust tight | Powerful water jets from a 12.5 mm nozzle, about 100 litres a minute, from about 3 m, for at least 3 minutes | A hose with a strong jet |
| IP67 | Dust tight | Immersion to 1 m for 30 minutes | Dropped in a tank or left in a puddle |
| IP68 | Dust tight | Continuous immersion beyond 1 m, on terms the maker states | Stays under water |
| IP69K | Dust tight | Water at 80 °C and 80 to 100 bar, 10 to 15 cm from the nozzle, from four angles while the sample turns | A hot high-pressure washdown lance |
IP65 to IP68 are defined in IEC 60529. IP69K comes from the road-vehicle standard ISO 20653; IEC 60529 has since added IP69, a similar test, but the two are not the same.
NEMA 4X and NEMA 6
NEMA ratings are the North American way of describing an enclosure (NEMA 250). They are not a direct translation of IP codes, because they also cover corrosion, ice and how the enclosure is built.
Which areas need which
| Area | Typical cleaning | What to look for |
|---|---|---|
| Dry packing, warehouse, office | Wipe down | Dust protection; IP65 or IP66 is plenty |
| General processing and packing | Hose and foam, low pressure | IP66 / NEMA 4X on the enclosure |
| Wet areas where water pools, cowsheds, outdoor | Hose, splashes, standing water | IP66 / NEMA 4X enclosure with IP67 / IP68 connectors and caps |
| Meat, poultry and dairy high-care rooms | Hot water at high pressure | Ask how close and how hot the lance gets, and plan the position of the screen |
The weak points are the openings
Water rarely gets in through a stainless face. It gets in through cable glands, unused ports and connectors that were left uncapped, and through a gasket that was reseated badly after a service. Cap every unused connector, give every cable a drip loop so water runs off before it reaches the plug, and point connectors down or sideways, never up into the spray.
A high-pressure lance held close to a gasket can force water past it whatever the rating, because the test distance (3 m for IP66) is further than a cleaner stands. Train cleaning crews to wash the screen rather than blast it, and mount it where the lance does not need to come close: high enough to be out of the direct line of the floor wash, and not directly above a drain that is hosed every shift. The position of the screen does as much for its life as the rating does.
STX Technology enclosures and connectors
The waterproof ranges, the X7000, X9000 and X7500 in stainless steel and the X7600 in aluminium (and the X7500 and X7600 large formats), are IP66* / NEMA 4X*, with IP69K* as an option, and their connectors are IP67 / IP68 (NEMA 6 equivalent). The X9000 adds extra heavy-duty protection around its connectors for the heaviest washdown. Every range is fanless, so there is no vent for water to find.
If your cleaning uses hot high-pressure water close to the screen, tell us the pressure, the temperature and how close the lance gets, and the team will say what fits and where to mount it.
Quick answers
IP65 vs IP66: what is the difference?
Both are dust tight. IP65 is a jet from a 6.3 mm nozzle; IP66 a stronger jet from a 12.5 mm nozzle at about eight times the flow. For a hosed line, look for IP66.
Is IP67 better than IP66 for a washdown line?
Not necessarily. IP67 is immersion and IP66 is a jet; they test different things. For a hosed line you want the jet test on the enclosure, and IP67 / IP68 on the connectors where water pools.
IP67 or IP68?
Both are immersion. IP67 is a set test (1 m for 30 minutes); IP68 is longer or deeper, on terms the maker states, so read what the maker says it means.
What does IP66 mean?
Dust tight (6), and protected against powerful water jets (6): a 12.5 mm nozzle, about 100 litres a minute, from about 3 m.
What is NEMA 4X?
A North American enclosure type for indoor or outdoor use that protects against dust, rain, hose-directed water and corrosion. For water it is close to IP66.
Is IP69K the same as IP69?
Close, not the same. IP69K is the hot high-pressure test of ISO 20653; IP69 is the similar test IEC 60529 added later.
Do STX Technology products have the IP69K rating?
As an option: the waterproof ranges are IP66* / NEMA 4X* as standard, with IP69K* as an option, and IP67 / IP68 connectors (NEMA 6 equivalent). For hot high-pressure cleaning close to the screen, tell us the conditions and the team advises on the product and its position.
Where does water actually get in?
Through uncapped ports, cable glands and a badly seated gasket, not through the stainless face. Cap unused connectors, add drip loops, point connectors down and mount the screen out of the direct wash. @related Washdown touch screens=/env-washdown ;; Stainless steel=/env-stainless ;; Stainless or aluminium=/guide/material ;; Industrial connectors=/acc-connectors ;; Glossary=/glossary
