X5400 rack mount touch PC and monitor
An all-in-one touch PC in a carbon steel enclosure for a standard 19" server or network rack, fixed with cage nuts. Proven in industrial environments, for automation, process control and SCADA.

The standard choice is selected. Choose what you need.
Specifications
* A guide. The temperature a product runs at depends on how and where it is installed: processor load, airflow and clearance behind it, the cabinet or enclosure it sits in, sunlight and the air around it. One figure cannot cover every installation. Tell us about yours and we will confirm what suits it.
Standard on every X5400
- Carbon steel enclosure
- 19" rack mount (EIA-310), cage nuts
- Cables exit from the bottom
- 4 × USB 3.0, 2 × Ethernet, HDMI, mini DisplayPort
- 10–30 V DC power input
- TPM 2.0
- Network boot (PXE)
Downloads
Where it is used
- Fits a 19" rack (EIA-310) with a standard cage nut system.
- Cables leave from the bottom; the front stays clear for maintenance and upgrades.
- Used for SCADA and MES, data acquisition, networking and plant automation.
- Also as a touch monitor, or a KVM monitor up to 100 m from its computer over one CAT6 cable.
About the X5400
The X5400 is a rack mount touch PC for a standard 19" server or network rack: an all-in-one industrial touch computer in a steel enclosure to EIA-310, 4 to 8 RU, fixed with cage nuts, with a matte black finish. It is made from 12.1" to 18.5" with resistive or PCAP touch, on an Intel Generation 11 processor or ARM RK3588S with TPM 2.0, running Windows 11 IoT Enterprise LTSC or Linux.
Cables leave from the bottom, so the front stays clear for maintenance and upgrades. The X5400 is used in automation and process control, SCADA and MES, data acquisition and networking, in control rooms and plant racks. It is also sold as a rack mount touch monitor, or a KVM monitor up to 100 m from its computer; the XC5400 is the 1U rack PC with no screen.
As a touch monitor or KVM monitor
The X5400 is also made with no computer inside. As a touch monitor it shows the picture from a computer or PLC nearby and sends the touch back to it. As a KVM monitor it takes video and touch from its computer up to 100 m away over one CAT6 cable, so the computer can stay in a dry, clean room.
Both use the same enclosure as the X5400 panel PC, in 12.1" to 18.5". Choose Touch monitor or KVM monitor under Type above to see the model codes and the video inputs, or compare every range on the touch screen monitors page.
Talk to our Australian team.
Tell us where it has to work and what it has to do, for a quick reply.
STX Technology worldwide
Talk to our Australian team, with STX Technology in New Zealand, Australia, the UK and North America.
